Havis Shields 2004 2008 Ford Econoline Van C VS 1800 ECO User Manual

INSTALL INSTRUCTIONS C-VS-1800-ECO

2004-2008 FORD ECONOLINE VAN

TOOLS REQUIRED:

3/8” Standard Socket Set

3/8” Metric Socket Set

3/8” Ratcheting Wrench

Powered drill w/ drill bit set

Open-end wrench set

Screw driver set

HARDWARE & COMPONENTS:

QTY DESCRIPTION

PART #

¼-20 Nylock nut

¼” Flat washer

¼-20 x ¾” Carriage bolt

¼-20 x 1 ¼” Hex head bolt

#10 x 1” Phillips sheet metal screw

Torx Screw Hardware Kit

GSM30016

GSM31005

GSM32000

GSM33003

GSM33196

C-HK-1

Always!

ꢀ Read all instructions before installing any Havis-Shields Equipment Corp products.

ꢀ Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!

ꢀ Use hardware provided with install kit

INSTALL C-VS-1800-ECO:

1. Remove O.E.M. engine cover accessory package (cup holder/storage pocket).

2. Place new console housing with mount brackets against engine cover and

floor. Mark engine cover and drill four (4) - 5/16” diameter holes. Mark

outline of floor bracket.

Also remove

washers from studs

C-VS-1800-ECO_INST_9-07

6. Attach Console to Mount Brackets.

7. Finished Product

C-VS-1800-ECO_INST_9-07